 |
 |
 |
 |
Features
-
Independent 3-way adjustments:
-
Yaw (horizontal rotation): 360º
-
Pitch (tilt up and down): -20º to 10º
-
Roll (tilt side to side): +/- 7º ;
-
Fits standard 1.5 inch NPT pipe
-
No plastic, 100% metal construction
-
Integrated cable management, cable routing inside channel
-
Quick and easy release of projector
-
Includes all mounting hardware
-
Finished appearance, no screws to be seen Available in White, Black and Silver
Compatible with the following projectors: Acer: 7753C, 7755C, 7763P, 7765PA, 7765PE, PD100, PD100D, PD113P, PD115, PD116, PD116P, PD116PD, PD120, PD120D, PD123, PD123P, PD125, PD125D, PD321, PD322, PD520, PD523, PD525, PD525D, PD721, PD723P, PD725P, PH110, SL700S, SL700X, SL710S, SL710X BenQ: MP610 PB2140 PB2240 PB2250 PB6110 PB6210 PB6240 PB7110 PB7210 PB7230 PE5120 DELL: 1100MP, 2100MP, 2200MP, 2300MP, 2400MP, 3200MP, 3300MP, 4100MP, 5100MP Epson: S1, S1+, S3, S4, Home 10, Home 10+, Home 20, 76C, 710C, EMP-TW10H, EMP-30, EMP-74 HP: VP6310 VP6320 VP6110 VP6111 VP6120 VP6121 VP6220 MP3220 XP8010 Xp8020 Infocus - ASKProxima: C40 C50 C100 C105 C109 C110 C160 C170 C180 C200 C300 C410 C420
- Proxima: DP2000S/X DP6150 DP6155 DP6500X DP8000 DP8200X
- Infocus: X1 X1a X2 X3 SP110 SP4800 SP4805 SP5000 SP5700 SP7200 SP7205 SP7210 LP240 LP250 LP340 LP350 LP500 LP530 LP540 LP600 LP640 LP650 LP690 LP790 LP815 LP820 C440 C450 C460 DP8300X DP8400X DP8500X LP840 LP850 LP860
Mitsubishi: XD450U, XD400U, XD300U, XD205U, XD110U SD205U, SD110U ES100U, EX100U SL2SU SL4SU XL8U HC3, HC100U, HC900U, HC3000U, HD4000U NEC: HT1000 , HT1100 ; HT410 , HT510 ; LT180 , LT245 , LT265 , LT30 , LT35 ; VT37 , VT47 , VT470 , VT 575 , VT 670, VT676 , VT 770 OPTOMA : H27 H31 H57 H30 H56 H55 H50 HD72 (H72) HD70 HD7100 EP747 HD6800 HD70 HD73 EP1960 EP716 EP719 EP738 EP739 EP758 EP579 EP732 EP745 EP751 EP730 EP750 DS305 DX605H79, H78 (H78DC3), H77, H76 Panasonic: PT-AX100U PT-AE900U PT-AE700U PT-AE300U PT-AE500U PT-LB20U PT-LB30U Sanyo: PLV-Z1, PVL-Z2, PVL-Z3, PVL-Z4 Sharp: XR-10S XR-10X XR-20S XR-20X XR-11XC PG-A10X PG-A10S Sharp Notevision2 (XG-NV2U) SharpVision XV-Z2000 SONY: VPL-CS10, VPL-CS20A , VPL-CS7 , VPL-CX10, VPL-CX11, VPL-CX20A , VPL-CX70 , VPL-CX76 , VPL-CX80 , VPL-CX86 , VPL-DS100 , VPL-ES1 , VPL-ES2 , VPL-HS10, VPL-HS20, VPL-HS51 , VPL-HS51a, VPL-HS60 , VPL-PS10, VPL-PS15, VPL-PX10, VPL-PX15, VPL-PX20, VPL-PX21, VPL-PX30, VPL-PX31, VPL-PX32, VPL-PX35, VPL-PX40, VPL-PX41 , VPL-S600U, VPL-S900U, VPL-VW10HT, VPL-VW11HT, VPL-VW12HT, VPL-X1000U, VPL-X600U, VPL-X900U Toshiba: TDP-S25U(TDP-S25) TDP-S26U(TDP-S26) TDP-S20U TDP-SC25U TDP-SW25U TDP-T40U TDP-T90AU TDP-T91AU TDP-T98U TDP-TW90AU TDP-T30U TLP-S10U TLP-S70U TLP-S8U TLD-T9U TLP-ET1 TDP-MT200 TDP-MT500 TDP-MT700 If your projector is not listed as a compatible model, it does not mean the mount would not work Here are some ways to find it out 1. Must Haves - Necessities for ceiling mounting a) The projector must be able to flip the image upside down. When mounted, the projector is with its bottom up. For example, Sharp PG-B10S could not. 99% of the projectors between 2LB to 20 LB could do the work. b) The projector does have 3 or 4 threaded holes on the bottom, they could vary from 2.5mm (about 1/10 inch) to 6mm (about 1/4 inches) c) The projector is at the right dimension. Normally projectors > 20 LB have a too big outer box for this mount. Make Certain - Sufficient Conditions Email seller with following info, if possible, the easier way is send a picture with a penny or tape shown. a) The Brand and Model of your projector. b) The distance between the 3 or 4 screw holes. If your projector is less than 8 LB, ignore this step.If any distance between the screws are less than 10 inches, ignore this step If your projector has three holes, denoted by A, B, C, please measure the distance between any two of them, A-B, B-C, C-A If 4 holes, denoted by A, B, C, D, measure one diagonal and 4 sides, or A-B, B-C, C-D, D-A, A-C
Complete Kit: This item include ALL the screws, bolts, fasteners which are necessary for the installation. You just need tools like screw drivers, tape measure.
NO restocking fee No shipping deduction (Express shipping is non-refundable) 100% Satisfaction Guarantee No RMA requirement
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Features
- Professional design instead of amateur products using after market material
- NO spacers needed, which is prone to damage your projector screw threads
- No plastic, 100% metal construction
- Dual Purpose: 3.25" Low profile mounting or 10" ~ 14" drop with FREE extension.
- All instructions, hardware, allen wrench are included.
- Powder-coating finish instead of raw material type no finish.
- All-direction adjustments and lock-in-place
|
|
 |
 |
 |
 |

|